- 中文名称
Urease Assay Kit, BioAssay
- 英文名字
- Urease Assay Kit, BioAssay
- 供应商
- USBiological
- 产品货号
- U2015-02
- 产品报价
- ￥1/96Tests
- 产品说明书
- 点击查看
- 购买方式
- 银行转账、电汇、支票、现金，在线支付宝及网银支付，或直接与我们电话联系400-6800-868
- 产品新闻
- 背景资料
- 产品描述
- Urease (Amidohydrolase, EC 3.5.1.5) is an enzyme that catalyzes the hydrolysis of urea into carbon dioxide and ammonia.(NH2)2CO+H2O → CO2+2NH3Many gastrointestinal or urinary tract pathogens produce urease. Thus its activity is a useful diagnostic parameter for the presence of pathogens such as Helicobacter pylori. Urease is found in bacteria, yeast, and higher plants. Urease activity is commonly determined in anaerobes of the bovine rumen, human feces and environmental samples such as soils and phytoplanktons.Urease Assay Kit provides a very sensitive and convenient means to measure urease activity in a variety of samples including soil. In the assay, urease reacts with urea, resulting in the formation of ammonia, which is determined by the Berthelot method at 670nm. The assay is simple, sensitive, stable and high-throughput adaptable.Key Features:Safe. Non-radioactive assay.Sensitive and accurate. As low as 0.003 U/L urease activity can be quantified.Homogeneous and convenient. Mix-incubate-measure type assay. No wash and reagent transfer steps are involved.Robust and amenable to HTS: can be readily automated on HTS liquid handling systems for processing thousands of samples per day.Applications:Urease activity determination in biological and environmental samples.Evaluation and screening for urease inhibitors.Kit Contents:Assay Buffer: 20ml (pH 7.0) Reagent A: 12mlUrea: 1.5ml Reagent B: 6mlNH4Cl: 100ul 50mMStorage conditions: store all reagent at 4°C. This product is shipped at room temperature. Shelf life of 6 months after receipt.Precautions: reagents are for research use only. Normal precautions for laboratory reagents should be exercised while using the reagents. Please refer to Material Safety Data Sheet for detailed information.Assay Procedure:Interference: ammonia is known to interfere with this assay and prior to assay, should be removed by dialysis or filtration.1. Assay Preparation. Prior to assay, bring all components to room temperature. For calibration curve, prepare a 500uM premix by mixing 5ul 50mM NH4Cl and 495ul Buffer. Dilute NH4Cl as followsNo Premix+Buffer Vol (ul) NH4+ (uM)1 100ul+0ul 100 5002 80ul+20ul 100 4003 60ul+40ul 100 3004 40ul+60ul 100 2005 30ul+70ul 100 1506 20ul+80ul 100 1007 10ul+90ul 100 508 0ul+100ul 100 0Transfer 90ul into separate wells of a clear flat-bottom 96-well plate. Samples. Dilute sample in Assay Buffer (Note: it is prudent to test different dilutions to ensure urease activity is within the detection range). Transfer 90ul sample into separate wells. Use 90ul enzyme buffer as a Sample Blank.2. Enzyme Reaction. Add 10ul Urea to each well. Incubate at desired temperature for 10 min.3. Detection. Add 100ul Reagent A to each well. Tap plate to mix. Then add 50ul Reagent B to each well. Tap plate to mix again. Note: addition of Reagent A terminates the urease reaction. Incubate for 30 min in the dark. Read optical intensity at 670nm (630-700nm).Calculation:Plot NH4Cl calibration curve and determine its Slope (uM-1). Urease enzyme activity in the sample is calculated asUrease Activity =ODSAMPLE–ODBLANKSlope x t(U/L)where ODSAMPLE and ODBLANK are the measured OD values of the Sample and Sample Blank (enzyme buffer). t is the incubation time (10 min) for standard urease assay. If urease activity is higher than 25 U/L, dilute enzyme in assay buffer, repeat assay and multiply the calculated activity by the dilution factor.Unit definition: one unit of urease catalyzes the formation of 1uMole ammonia per min at pH 7.0 under the assay conditions.General Considerations:(1). Soil and other environmental samples can be extracted in Assay Buffer (10mM sodium phosphate, pH 7.0) using any established methods. For such low urease activity samples, incubate the urease reaction for 2 to 4 hours at 30 or 37°C (Step 2). Soil samples may contain very low concentrations of ammonia. To correct for sample ammonia, immediately prior to detection (Step 3), prepare Sample Blank by mixing the following in this order: 100ul Reagent A, 90ul sample extract, 10ul urea and 50ul reagent B.(2). Cuvet assays: scale up 4-fold to a total of 1ml reaction by using 360ul Sample, 40ul Urea, 400ul Reagent A and 200ul Reagent B.Materials Required, But Not Provided:Pipetting devices, centrifuge tubes, clear flat-bottom 96-well plate (e.g. Corning Costar).
- 产品特点
- 针对Urease Assay Kit, BioAssay该产品的特点优势，欢迎查阅官网提供的产品说明书。
- 保存建议
- 建议收到Urease Assay Kit, BioAssay产品后将其置于4°C保存。
- 其他
- Usbiological公司是美国著名的抗体和生化试剂供应商，生产世界上种类最多的抗体，用于Western Blot、免疫沉淀、免疫荧光、免疫组化和流式细胞术等多种检测方法。Usbiological公司现已拥有超过50,19234种抗体、抗原和生化产品，为科研用户提供了诸多超值选择。
-
- 注意
-
该页面的中文产品信息的翻译，仅供参考。准确的产品信息请以厂家的英文说明书为准。下单前，请浏览说明书确认。
-
