The sFMC （Soluble Fibrin Monomer Complex） BioAssay ELISA Kit （Human） is a quantitative sandwich assay for the detection of sFMC in human plasma.Detection Range：1.563-100ug/mlSensitivity：<0.938ug/mlPrecision： Intra-Assay CV： <8%Inter-Assay CV： <10%Assay Principle：The microtiter plate provided in this kit has been pre-coated with an antibody specific to sFMC. Standards and samples are added to the appropriate microtiter plate wells followed by a biotin-conjugated antibody specific to sFMC. Streptavidin conjugated to Horseradish Peroxidase （HRP） is added to each microplate well and incubated. After TMB substrate solution is added，only those wells that contain sFMC，biotin-conjugated antibody and enzyme-conjugated Streptavidin complex will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulfuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of sFMC in the sample is then determined by comparing the O.D. of the sample to the standard curve.Kit Components：*358820A： Microtiter Strips，8x12 wells.*358820B： Standard，2 vials358820C： Sample/Standard Dilution Buffer，1x20ml358820D： Antibody-Biotin （Concentrated），1x120ul358820E： Antibody Dilution Buffer，1x10ml358820F： Streptavidin-HRP Conjugate （SABC），1x120ul358820G： SABC Dilution Buffer，1x10ml358820H： TMB Substrate，1x10ml358820J： Stop Solution，1x10ml358820K： Wash Buffer （25X），1x30mlStorage and Stability：Store unopened *358820A at 4ºC; store at -20ºC once opened. Store unopened *358820B at 4°C; once reconstituted store at 4°C for up to 12 hours or at -20°C for up to 48 hours. Store other components at 4°C. Kit is stable for 6 months after receipt. For maximum recovery of product，centrifuge the original vials after thawing and prior to removing the cap.Assay Summary：1. Wash plate 2 times before adding standards，samples and control （zero） to wells!2. Add 100ul standard or sample to each well and incubate for 90 minutes at 37°C3. Add 100ul Antibody-Biotin working solution to each well and incubate for 60 minutes at 37°C4. Aspirate and wash 3 times.5. Add 100ul SABC working solution to each well. Incubate for 30 minutes at 37°C6. Aspirate and wash 5 times.7. Add 90ul TMB substrate. Incubate 15-30 minutes at 37°C8. Add 50ul Stop Solution. Read at 450nm immediately.9. Calculate results.
